FoundryNet / OEMs / Food & beverage process

PROCESS / BATCH · CANONICAL DATA MODEL

Food & beverage process canonical data model: connect your Food & beverage process equipment to any AI agent

Vertical pack coverage·1,031-field schema·12 protocols

Forge turns raw Food & beverage process tags into one governed schema your AI agent can read, and says plainly which tags it could not map.

Try it free: 3 machines, no credit card → See it work →

Paste your Food & beverage process data and see what Forge returns.

Read-only. Forge reads your Food & beverage process data through standard industrial protocols. It does not write to the line unless you deploy and enable the bridge.


The problem

Why Food & beverage process data is hard to integrate

F&B lines mix CIP state, flow, temperature and fill counts across PLCs from a dozen skid vendors, so line-level analytics stall on tag mapping before they ever start.

Typical Food & beverage process equipment communicates over OPC UA, Modbus TCP, MQTT, BACnet/IP. Each firmware revision, model line and integrator names the same physical quantity differently, so every AI or analytics project pays the integration cost again.


Coverage on prod

What Forge supports for Food & beverage process today

Forge has a vertical pack for common process tag names: Food and beverage process (23 mapped tags). Passing oem: "food_beverage" routes the request to the food and beverage vertical, which turns on that vertical's cross-vertical gate. Plant-specific historian names are not in the pack. Every mapping says how it was made in match_type; a tag no layer can place comes back abstained instead of forced onto a field.

OPC UAModbus TCPMQTTBACnet/IP
Vertical pack coverageProd support tier
23Mapped tags in named packs
food and beverageRoutes to vertical

Canonical process / batch fields in Forge's registry (all present on prod). Which Food & beverage process tags reach them depends on the tag; Forge does not force a mapping.

pasteurizer_temperature_cholding_tube_temperature_cpasteurizer_flow_lpmdivert_valve_statusfill_level_mlfill_speed_bpmcap_torque_nmmixer_speed_rpmviscosity_cpoven_temperature_ccold_storage_temperature_cevaporator_temperature_c

Source: prod /v1/coverage and /health, read 2026-10-27 (build 238a6b3). Forge does not publish a per-OEM coverage percentage, so this page does not show one.


Try it

Send Food & beverage process data to Forge

Connect the MCP server, or call the REST API directly:

claude mcp add --transport http forge https://mcp.foundrynet.io/mcp --header 'Authorization: Bearer YOUR_API_KEY'
# normalize raw Food & beverage process telemetry into the canonical schema
curl -s https://forge.foundrynet.io/v1/normalize \
  -H 'Authorization: Bearer YOUR_API_KEY' \
  -H 'Content-Type: application/json' \
  -d '{"data": {"pasteurizer_temp": 72.4, "holding_tube_temp": 72.1, "fill_speed": 240}, "oem": "food_beverage"}'

The response lists each tag's canonical field, match_type and confidence. Tags Forge cannot place come back abstained, and physically impossible values come back as null with a reason.

Start free: Forge API, 3 machines → See the full demo →

Related

Where Food & beverage process fits

Protocols
OPC UA Modbus TCP MQTT BACnet/IP

Vertical
process / batch

Other process / batch vendors
Chemical process Pharma process (GMP)

Same protocols, other industries
ABB Robotics DMG Mori Fanuc Heidenhain

Also searched as food, beverage, food and beverage, food-bev, cip, dairy


Food & beverage process in the canonical schema

For platforms Want this normalization inside your platform? License the engine and ship cross-vendor support as your own feature. 1,031-field canonical schema, 2,478 mappings, your brand. Platform licensing →
Why does a cross-vendor canonical data model matter? The Machine Agent breaks it down weekly. Read it →
Get the thesis behind this infrastructure: The Machine Agent, weekly.