CNC / MACHINE TOOL · CANONICAL DATA MODEL
2,461 confirmed mappings·12 protocols·99% field coverage
Forge turns raw Haas tags into one clean, governed schema your AI agent already understands. One MCP call, no per-machine integration project.
Paste your Haas data and see it normalized in 30 seconds. No POC required.
Read-only. Forge reads your Haas data through standard industrial protocols. Read-only. Your equipment is never at risk.
Haas Next Gen Control publishes over MTConnect, but production state lives in Q-variables and macro registers (macro_1102, Q600) that need decoding before an agent can reason about the cut.
Typical Haas equipment communicates over MTConnect, Modbus TCP, HTTP / REST. Each firmware revision, model line and integrator names the same physical quantity differently, so every AI or analytics project pays the integration tax again, the tax that cancels 40% of industrial AI deployments before they ship.
Forge resolves Haas telemetry into Forge's canonical field set, the same 1,027-field canonical schema (366 resolvable from vendor tags today), used across all 47 vendor packs. Point Forge at the machine, pass oem: "haas", and spindle speed is spindle_speed_rpm whether it came from a Haas controller or anything else on the floor.
Confirmed canonical fields your agent gets from Haas machines, drawn from Forge's 3,444-mapping corpus:
| Raw tag in | Canonical field out | Meaning | |
|---|---|---|---|
| Q600_1: 3400 | → | spindle_speed_rpm: 3400 | NGC spindle rpm |
| macro_1102: 78 | → | spindle_load_pct: 78 | spindle load macro |
| prog_active: "O00012" | → | program_name: "O00012" | active program |
| parts_counter: 4821 | → | part_count: 4821 | M30 parts counter |
No SDK, no per-tag mapping, no historian project. Connect the MCP server and normalize live Haas data:
Unknown tags never get force-mapped. Fields below the confidence floor abstain rather than guess, so your agent never acts on a bad reading.
Protocols
MTConnect Modbus TCP HTTP / REST
Vertical
CNC / machine tool
Other CNC / machine tool vendors
DMG Mori Fanuc Heidenhain Mazak Okuma Siemens Sinumerik
Same protocols, other industries
Yaskawa Motoman Universal Robots Chemical process Food & beverage process
Also searched as haas automation, haas ngc, haas cnc
spindle_speed_rpm spindle_load_pct axes.0.position_actual axes.0.load_percent axes.0.temperature_c feed_rate program_name part_count All fields →