FoundryNet / OEMs / Siemens Sinumerik

CNC / MACHINE TOOL · CANONICAL DATA MODEL

Siemens Sinumerik canonical data model: connect your Siemens Sinumerik equipment to any AI agent

OEM-specific corpus coverage·1,031-field schema·12 protocols

Forge turns raw Siemens Sinumerik tags into one governed schema your AI agent can read, and says plainly which tags it could not map.

Try it free: 3 machines, no credit card → See it work →

Paste your Siemens Sinumerik data and see what Forge returns.

Read-only. Forge reads your Siemens Sinumerik data through standard industrial protocols. It does not write to the machine unless you deploy and enable the bridge.


The problem

Why Siemens Sinumerik data is hard to integrate

Sinumerik 840D/828D controls surface data through OPC UA and S7 with deep BTSS paths like /Channel/Spindle/actSpeed. Expressive, but every integrator re-maps the same paths by hand.

Typical Siemens Sinumerik equipment communicates over OPC UA, PROFINET / S7, MTConnect. Each firmware revision, model line and integrator names the same physical quantity differently, so every AI or analytics project pays the integration cost again.


Coverage on prod

What Forge supports for Siemens Sinumerik today

Forge's corpus has Siemens Sinumerik-specific tag mappings (corpus tag siemens), so Siemens Sinumerik tags are matched against Siemens Sinumerik's own rows before anything generic. Passing oem: "siemens" routes the request to the CNC vertical, which turns on that vertical's cross-vertical gate. Every mapping says how it was made in match_type; a tag no layer can place comes back abstained instead of forced onto a field.

OPC UAPROFINET / S7MTConnect
OEM-specific corpus coverageProd support tier
CNCRoutes to vertical

Canonical CNC / machine tool fields in Forge's registry (all present on prod). Which Siemens Sinumerik tags reach them depends on the tag; Forge does not force a mapping.

spindle_speed_rpmspindle_load_pctspindle_current_ampsaxes.0.position_actualaxes.0.load_percentaxes.0.temperature_cfeed_ratecnc.path.feedrateprogram_nameprogram_numberpart_counttool_idmachining_statealarm_code

Source: prod /v1/coverage and /health, read 2026-10-27 (build 238a6b3). Forge does not publish a per-OEM coverage percentage, so this page does not show one.


Try it

Send Siemens Sinumerik data to Forge

Connect the MCP server, or call the REST API directly:

claude mcp add --transport http forge https://mcp.foundrynet.io/mcp --header 'Authorization: Bearer YOUR_API_KEY'
# normalize raw Siemens Sinumerik telemetry into the canonical schema
curl -s https://forge.foundrynet.io/v1/normalize \
  -H 'Authorization: Bearer YOUR_API_KEY' \
  -H 'Content-Type: application/json' \
  -d '{"data": {"/Channel/Spindle/actSpeed": 6000, "driveLoad": 62, "progName": "SHAFT_3.MPF"}, "oem": "siemens"}'

The response lists each tag's canonical field, match_type and confidence. Tags Forge cannot place come back abstained, and physically impossible values come back as null with a reason.

Start free: Forge API, 3 machines → See the full demo →

Related

Where Siemens Sinumerik fits

Protocols
OPC UA PROFINET / S7 MTConnect

Vertical
CNC / machine tool

Other CNC / machine tool vendors
DMG Mori Fanuc Haas Heidenhain Mazak Okuma

Same protocols, other industries
ABB Robotics KUKA Universal Robots Chemical process

Also searched as siemens, sinumerik, siemens cnc, 840d, 828d


Siemens Sinumerik in the canonical schema

For platforms Want this normalization inside your platform? License the engine and ship cross-vendor support as your own feature. 1,031-field canonical schema, 2,478 mappings, your brand. Platform licensing →
Why does a cross-vendor canonical data model matter? The Machine Agent breaks it down weekly. Read it →
Get the thesis behind this infrastructure: The Machine Agent, weekly.