CNC / MACHINE TOOL · CANONICAL DATA MODEL

Hurco canonical data model: connect your Hurco equipment to any AI agent

2,086 mappings·19 verticals·13 protocols

Forge turns raw Hurco tags into one clean, governed schema your AI agent already understands. One MCP call, no per-machine integration project.

Try it free: 3 machines, no credit card → See it work →

Paste your Hurco data and see it normalized in 30 seconds. No POC required.

Read-only. Forge reads your Hurco data through standard industrial protocols. Read-only. Your equipment is never at risk.

The problem

Why Hurco data is hard to integrate

Every controller names the same physical quantity differently (spindle speed alone ships as a dozen tag names across firmware revisions), and most shops still bridge it through MTConnect or a hand-rolled OPC UA server.

Typical Hurco equipment communicates over MTConnect, OPC UA. Each firmware revision, model line and integrator names the same physical quantity differently, so every AI or analytics project pays the integration tax again, the tax that cancels 40% of industrial AI deployments before they ship.

The solution

One universal schema for every Hurco machine

Forge resolves Hurco telemetry into Forge's canonical field set, the same 985 canonical fields defined, used across 45 vendor packs. Point Forge at the machine, pass oem: "hurco", and spindle speed is spindle_speed_rpm whether it came from a Hurco controller or anything else on the floor.

MTConnectOPC UA

45OEM packs in production

17Canonical CNC / machine tool fields

2,086Mappings in production

Field coverage

What Forge resolves for Hurco

Confirmed canonical fields your agent gets from Hurco machines, drawn from Forge's 2,086-mapping corpus:

spindle_speed_rpmspindle_load_pctspindle_current_ampsaxes.0.position_actualaxes.0.load_percentaxes.0.temperature_cfeed_ratecnc.path.feedrateprogram_nameprogram_numberpart_counttool_id

Sample normalization

Raw tag in		Canonical field out	Meaning
spindle_rpm: 4200	→	spindle_speed_rpm: 4200	actual spindle speed
sp_load_pct: 63	→	spindle_load_pct: 63	spindle load
active_prog: "HURCO-01"	→	program_name: "HURCO-01"	active program
part_ct: 1540	→	part_count: 1540	part count

30-second deployment

Add Hurco to your agent with one call

No SDK, no per-tag mapping, no historian project. Connect the MCP server and normalize live Hurco data:

claude mcp add --transport http forge https://mcp.foundrynet.io/mcp --header 'Authorization: Bearer YOUR_API_KEY'

# normalize raw Hurco telemetry into the universal schema

curl -s https://forge.foundrynet.io/v1/normalize \

-H 'Content-Type: application/json' \

-d '{"data": {"spindle_rpm": 4200, "sp_load_pct": 63, "active_prog": "HURCO-01"}, "oem": "hurco"}'

{"spindle_speed_rpm": 4200, "spindle_load_pct": 63, "program_name": "HURCO-01", "coverage": "100%", "confidence": 0.97}

Unknown tags never get force-mapped. Fields below the confidence floor abstain rather than guess, so your agent never acts on a bad reading.

Start free: Forge API, 3 machines → See the full demo →

Where Hurco fits

Protocols
MTConnect OPC UA

Vertical
CNC / machine tool

Other CNC / machine tool vendors
DMG Mori Fanuc Haas Heidenhain Mazak Okuma

Same protocols, other industries
Yaskawa Motoman ABB Robotics KUKA Universal Robots

Also searched as hurco, winmax

Hurco in the canonical schema

Canonical fields this OEM maps

spindle_speed_rpm spindle_load_pct axes.0.position_actual axes.0.load_percent axes.0.temperature_c feed_rate program_name part_count All fields →

Protocol comparisons

MTConnect vs OPC UA Modbus TCP vs OPC UA MQTT / Sparkplug B vs OPC UA J1939 (CAN) vs OPC UA